Miniature Civil War Cannon, Napoleon Cannon, Fully Functional Replica, .177 Cal

Description

Miniature Civil War Cannon, Napoleon Cannon, Fully Functional Replica, .177 Cal
Specs:
Caliber is .177 (BB)
Vent is 1/16in or 0.0625" (typically I use fuses from bottle rockets)
Overall length is about 3.75"
Width is about 1.75"
Barrel length is about 2.312"
Barrel width is about 0.5"
The barrel is made from brass, the carriage is made of real wood and the elevating screw/axle are made from steel.
All these are somewhat variable due to the human error that the handmade aspect of these cannons introduces.
Here's my quick backstory.
I know that no one wants to read my entire life story so I'll try to be brief about why I make these. When I was around 13 I became obsessed with the Civil War and cannons in particular. I built my first few cannons out of wood and bits of scrap metal. Fast forward a few years and I was looking to buy miniature
workin
g replicas and the best I could find cost 0+ and did
not
have an elevating screw or they were diecasts. Most working models barely looked like Napoleon cannons as well so I set out to build the best, most historically accurate .177 (BB) caliber cannons that I could and this is the result. I take pride in every single one of my cannons and I'm sure you'll enjoy them as much as I do.
DISCLAIMER: I take no responsibility whatsoever for
any
actions after these replicas leave my possession. These are meant for educational purposes only. Thank you!